Alpine MRX-F65

Alpine MRX-F65

Introducing the new digital X-Power series of Class-D amplifiers. The X-Power amplifiers incorporate many of Alpine’s PDX advanced digital technologies at an affordable price. Don’t let their small size fool you, these amplifiers were specifically engineered to offer performance, sound quality and reliability at PDX standards.

Specifications:
  • 110 Watts x 4 into 4 Ohms
  • 160 Watts x 4 into 2 Ohms
  • Class-D, Best Dollar-Per-Watt Performance
  • PDX Technology Inside
  • Sleek Aggressive Design w/ End Caps
  • Voltage ON/OFF Sensing, Non-Fading Speaker-Level Inputs for OEM Upgrade
  • Built-in Crossover
  • Extremely Low Noise and Distortion
  • Extremely High Damping Factor
  • Reliable No-Shutdown Design

Alpine MRP-F600

Alpine MRP-F600

 V-Power amplifiers deliver the sound quality that made Alpine famous. Highly efficient power supplies housed in sleek black casings guarantee that these amps stand out in performance and appearance. The thermal management system dissipates heat and saves power, so your V-Power amp will run reliably for years to come.

 
Highlights:
  • 4-channel car amplifier
  • 100 watts RMS x 4 at 4 ohms (150 watts RMS x 4 at 2 ohms)
  • 300 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
  • 2-, 3-, or 4-channel output
  • variable high-pass/low-pass filters (50-400 Hz, 12 dB/octave)
  • selectable bass boost (12 dB at 50 Hz)
  • subsonic filter (15 Hz, channels 3 & 4 only)
  • MOSFET power supply
  • CEA-2006 compliant
  • STAR Topology (minimizes internal noise and prevents ground interference)
  • speaker- and preamp-level inputs
  • gold-plated screw terminals
  • fuse rating: 25A x 3
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
 
Specifications
  • RMS Power Output (Watts x Channels) 100 x 4
  • Power at 2 Ohms (Watts x Channels) 150 x 4
  • Bridged Power (Watts x Channels) 300 x 2
  • Minimum Impedance Bridged 4
  • Minimum Impedance Unbridged 2
  • Best Frequency Response 20-20k Hz
  • THD at Rated RMS Power 1%
  • Signal to Noise Ratio 80 dB
  • Input Voltage 14.4v

Alpine PDX-V9

Alpine PDX-V9

This super-wide, industry leading frequency range offers listeners unparallel sound quality and detail that bests even the most high-end audiophile equipment. 5Hz-100kHz for 4ch, 5Hz-400Hz for Mono (+0,-3dB), and 3Hz~100kHz (+0dB, -3dB), Mono: 3Hz~600Hz (+0dB, -3dB) for 5ch.

5 Channel Power Density Digital Amplifier
New Reference Grade Output Stage
Ultra-Wide Frequency Response
 
SPECIFICATIONS
 
CEA-2006 Power Ratings
  • CEA-2006 Power Rating: 100W RMS x 4 + 500W RMS x 1 (4-ohm/2-ohm, 14.4V at <1% THD+N)
Max Power Output Ratings
  • Max Power: 1600W
  • RMS Power Ratings
  • Per channel into 4 Ohms: 100W RMS x 4 + 500W RMS (4-ohm, 14.4V <1%THD+N)
  • Per channel into 2 Ohms: 100W RMS x 4 + 500W RMS (2-ohm, 14.4V <1%THD+N)
  • Bridged 4 Ohms: 200W RMS x 2 (4-ohm, 14.4V <1%THD+N)
Sound Tuning
  • Crossover Frequency (CH1/2, HPF): 30 - 600 Hz (x1), 300 - 6k Hz (x10), -12 dB/oct.
  • Crossover Frequency (CH3/4, HPF): 30 - 600 Hz (x1), -12 dB/oct.
  • Crossover Frequency (CH3/4, BPF): 30 - 600 Hz (HPF), 300 - 6k Hz (LPF), -12 dB/oct.
  • Crossover Frequency (Subwoofer): 50 - 600 Hz, -24 dB/oct.
  • Subsonic Filter: 3 - 30 Hz, -24 dB/oct.
Dimensions
  • Foot Print (WxHxD) mm: 257 x 50.8 x 192 mm
 
General
  • Power Requirements: 14.4 V.DC (11-16 V allowable)
  • Input Sensitivity (RCA Input): 0.2 - 4 V (CH1/2, CH3/4), 0.1 - 4 V (Subwoofer)
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 3 - 100k Hz
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 3 - 600 Hz
  • THD+N (10W into 4 Ohms) for CH-1/2/3/4: <0.005 %
  • THD+N (10W into 4 Ohms) for Subwoofer: <0.006 %
  • THD+N (Rated Power into 4 Ohms) for CH-1/2/3/4: <0.03 %
  • THD+N (Rated Power into 4 Ohms) for Subwoofer: <0.05 %
  • Damping Factor for CH-1/2/3/4: >500 into 4 ohms at 100Hz
  • Damping Factor for Subwoofer: >1000 into 4 ohms at 100Hz
  • Signal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 112 dB
  • Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 119 dB
  • Weight: 2.7 kg
FEATURES
Install
  • Connectors: Quick Connect Terminals for Power Supply and Speaker Output
  • Terminal Layout: One-Sided
  • Mounting Design: Easy Stacking and Smart Installation
  • General
  • Amplifier Type: Class-D (Digital)
  • Channel Design: 4-channel + 1-channel (Mono)
  • Power Supply Design: DC-DC PWM Power Supply
  • Pre-Amp Stage: Discreat
  • Final Outputs: MOSFET
  • Crossover: Variable High Pass, Low Pass and Band Pass Filter
  • Gain Control: Continuously Adjustable Gain Control
  • Subsonic Filter: Variable Subsonic Filter
  • Bass Control: Remote Bass Control (RUX-KNOB) Ready
  • Low-battery Protection: Low-battery Protection
  • Low-impedance Possibility: Low-impedance Possibility
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Board Circuitry: S.T.A.R. Circuit
  • Board Design: 6-layer Glass Epoxy PC Board
  • Power Indicator: Top Mounted LED Power/Status Indicator
  • Input Channel Mode Setting (CH1/2 & CH3/4): Input Channel Mode Setting (CH1/2 & CH3/4)
  • Input Channel Mode Setting (Subwoofer): Input Channel Mode Setting (Subwoofer)
  • Thermal Control: Thermal Management Control

Alpine PDX-M6

Alpine PDX-M6

 The all-new PDX series amplifiers are not your typical class-D amplifiers. Traditionally, class-D amplifiers have not been known for both low distortion and wide frequency response. These new PDX amplifiers are the first ever class-D amplifiers to break tradition and trump the amps of yesterday. The PDX-M12, PDX-M6, PDX-F6, and PDX-F4 are synonymous with extremely high resolution and detail.

Mono Power Density Digital Amplifier
 
Features and Specification
 
SPECIFICATIONS
 
CEA-2006 Power Ratings
  • CEA-2006 Power Rating: (4/2 I? @14.4V ?% THD+N), S/N: 95dBA, ref:1W into 4 I?) 600W x 1
RMS Power Ratings
  • Per channel into 4 Ohms: (@ 14.4V ?%THD+N) 600W x 1
  • Per channel into 2 Ohms: (@ 14.4V ?%THD+N) 600W x 1
Sound Tuning
  • Crossover Frequency (LPF): Variable, 50Hz - 400Hz (-24dB / oct), (Variable, L.P.F Only, 1/2 ch)
  • Subsonic Filter: OFF / 15Hz / 30Hz
Dimensions
  • Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm
General
  • Power Requirements: 14.4V DC (11V to 16V)
  • Input Sensitivity (RCA Input): Select Vol, 0.1V to 1.0V or 1.0V to 8.0V (For Rated Power)
  • Cable size: 4 AWG (BATT and GND), 12 AWG (Remote), Up to 8 AWG (Speaker)
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 5 Hz - 400 kHz / 0dB ~ -3dB (Reference: 1 W into 4 ohms)
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 4 or 2 I?
  • Frequency Response (+0, -1dB: 1W into 4 Ohms) for CH-1/2/3/4: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4I?) 95dBA
FEATURES
 
Install
  • Connectors: Quick Disonnect Terminals (Power Terminal and Speaker Terminals)
  • Terminal Layout: One-Sided
  • Mounting Design: Easy Stacking and Clean-look installation
  • General
  • Amplifier Type: Class-D (Digital)
  • Channel Design: 1 Channel (Mono)
  • Thermal Protection:
  • Low-battery Protection:
  • Power Supply: Resonant Mode Power Supply
  • Power Supply Design: DC-DC PWM Power Supply
  • Board Circuitry: STAR Circuit
  • Current Protection: Auto Over-Current Protection
  • Power Indicator: Top Mounted Blue LED Power/Status Indicator
  • RCA Output: Non-Fading Pre-Amp Output
  • Crossover: Adjustable Low-Pass
  • Pre-Amp Stage: Discrete
  • Final Outputs: MOSFET
  • Board Design: 6-Layer Glass Epoxy PC Board
  • Gain Control: Adjustable
  • Bass Control: Remote Bass Control (Sold Separately)

Alpine PDX-M12

Alpine PDX-M12

 The new Alpine PDX Series amplifiers are completely re-engineered for performance, sound quality, and reliability. The PDX series are for the true car audio enthusiast, all from a compact size. Consider the bar raised.

Mono Power Density Digital Amplifier
 
Features and Specification

SPECIFICATIONS
 
CEA-2006 Power Ratings
  • CEA-2006 Power Rating: (4/2 I? @14.4V ?%THD+N), S/N 92dBA, ref:1W into 4 I?) 1200W x 1
RMS Power Ratings
  • Per channel into 4 Ohms: (@14.4V ?%THD+N) 1200W x 1
  • Per channel into 2 Ohms: (@14.4V ?%THD+N) 1200W x 1
Sound Tuning
  • Crossover Frequency (LPF): Variable, 50Hz - 400Hz (-24dB / oct), (Variable, L.P.F Only 1/2 ch)
  • Subsonic Filter: OFF / 15Hz / 30Hz
Dimensions
  • Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm
 
General
  • Power Requirements: 14.4V DC (11V to 16V)
  • Input Sensitivity (RCA Input): Select Vol, 0.1V to 1.0V or 1.0V to 8.0V (For Rated Power)
  • Cable size: 4 AWG (BATT and GND), 12 AWG (Remote), Up to 8 AWG (Speaker)
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 5 Hz - 400 kHz / 0dB ~ -3dB (Reference: 1 W into 4 ohms)
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 4 or 1 I?
  • Frequency Response (+0, -1dB: 1W into 4 Ohms) for CH-1/2/3/4: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4I?) 92 dBA
FEATURES
 
Install
  • Connectors: Quick Disonnect Terminals (Power Terminal and Speaker Terminals)
  • Terminal Layout: One-Sided
  • Mounting Design: Easy Stacking and Clean-look intallation
General
  • Amplifier Type: Class-D (Digital)
  • Channel Design: 1 Channel (Mono)
  • Thermal Protection:
  • Low-battery Protection:
  • Power Supply: Resonant Mode Power Supply
  • Power Supply Design: DC-DC PWM Power Supply
  • Board Circuitry: STAR Ciruit
  • Current Protection: Auto Over-Current Protection
  • Power Indicator: Top Mounted Blue LED Power/Status Indicator
  • RCA Output: Non-Fading Pre-Amp Output
  • Crossover: Adjustable Low-Pass
  • Pre-Amp Stage: Discrete
  • Final Outputs: MOSFET
  • Board Design: 6-Layer Glass Epoxy PC Board
  • Gain Control: Adjustable
  • Bass Control: Remote Bass Control (Sold Separately)

Alpine PDX-F6

Alpine PDX-F6

 In essence the Alpine PDX-F6 does indeed provide a totally transparent sound performance, which is precisely what a 'sound quality' amplifier should provide.

 
4/3/2 Power Density Digital Amplifier
 
Features and Specification
 
SPECIFICATIONS
 
CEA-2006 Power Ratings
  • CEA-2006 Power Rating: (4/2 I?@14.4V ?%THD+N), S/N 96dBA (Ref. 1W into 4 I?): 150W x 4
RMS Power Ratings
  • Per channel into 4 Ohms: (@14.4V ?%THD+N) 150W x 4
  • Per channel into 2 Ohms: (@14.4V ?%THD+N) 150W x 4
  • Bridged 4 Ohms: Bridged 4 I?: 300W x 2 (?% THD+N)
Sound Tuning
  • Crossover Frequency (LPF): Variable, 30-400Hz (-12dB / oct ), Low-Pass/High-Pass/OFF Selectable
Dimensions
  • Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm
General
  • Power Requirements: 14.4V DC (11V to 16V)
  • Input Sensitivity (RCA Input): 0.2V to 4.0V (For Rated Power)
  • Cable size: 4 AWG (BATT and GND), 12 AWG (Remote), Up to 8 AWG (Speaker)
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 5 Hz - 100 kHz / 0 dB ~ -3dB (Reference: 1 W into 4 ohms)
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 4 or 2 I?
  • Frequency Response (+0, -1dB: 1W into 4 Ohms) for CH-1/2/3/4: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4I?) 96 dBA
FEATURES
 
Install
  • Connectors: Quick Disonnect Terminals (Power Terminal and Speaker Terminals)
  • Terminal Layout: One-Sided
  • Mounting Design: Easy Stacking and Clean-look installation
General
  • Amplifier Type: Class-D (Digital)
  • Channel Design: 4/3/2 Channel
  • Thermal Protection:
  • Low-battery Protection:
  • Power Supply Design: DC-DC PWM Power Supply
  • Board Circuitry: STAR Ciruit
  • Current Protection: Auto Over-Current Protection
  • Power Indicator: Top Mounted Blue LED Power/Status Indicator
  • Crossover: Adjustable High-Pass, Low-Pass
  • Pre-Amp Stage: Discrete
  • Board Design: 6-Layer Glass Epoxy PC Board
  • Gain Control: Adjustable

Alpine PDX-F4

Alpine PDX-F4

 Meet the New Amp Benchmark

The new Alpine PDX Series amplifiers are completely re-engineered for performance, sound quality, and reliability. The PDX series are for the true car audio enthusiast, all from a compact size. Consider the bar raised.
 
4/3/2 Power Density Digital Amplifier
 
Features and Specification
 
SPECIFICATIONS
 
CEA-2006 Power Ratings
  • CEA-2006 Power Rating: (4/2 I?@14.4V ?%THD+N), S/N 98dBA (Ref. 1W into 4 I?): 100w x 4
RMS Power Ratings
  • Per channel into 4 Ohms: (@14.4V %THD+N) 100W x 4
  • Per channel into 2 Ohms: (@14.4V %THD+N) 100W x 4
  • Bridged 4 Ohms: Bridged into 4I? (%THD+N) 200W x 2
Sound Tuning
  • Crossover Frequency (LPF): Variable, 30-400Hz (-12dB / oct ), Low-Pass/High-Pass /OFF Selectable
Dimensions
  • Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm
 
General
  • Power Requirements: 14.4V DC (11V to 16V)
  • Input Sensitivity (RCA Input): 0.2V to 4.0V (For Rated Power)
  • Cable size: 4 AWG (BATT and GND), 12 AWG (Remote), Up to 8 AWG (Speaker)
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 5 Hz - 100 kHz / 0dB ~ -3dB (Reference: 1 W into 4 ohms)
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 4 or 2 I?
  • Frequency Response (+0, -1dB: 1W into 4 Ohms) for CH-1/2/3/4: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4I?) 98 dBA
FEATURES
 
Install
  • Connectors: Quick Disonnect Terminals (Power Terminal and Speaker Terminals)
  • Terminal Layout: One-Sided
  • Mounting Design: Easy Stacking and Clean-look installation
  • General
  • Amplifier Type: Class-D (Digital)
  • Channel Design: 4/3/2 Channel
  • Thermal Protection:
  • Low-battery Protection:
  • Power Supply Design: DC-DC PWM Power Supply
  • Board Circuitry: STAR Ciruit
  • Current Protection: Auto Over-Current Protection
  • Power Indicator: Top Mounted Blue LED Power/Status Indicator
  • Crossover: Adjustable High Pass, Low Pass
  • Pre-Amp Stage: Discrete
  • Board Design: 6-Layer Glass Epoxy PC Board
  • Gain Control: Adjustable

Alpine PDX-4.150

Alpine PDX-4.150

Power Amp 4 x 150w rms         

4/3/2 Channel Power Density Digital Amplifier
Good things come in small, stackable packages. Who knew something so small could pump so much power? The Alpine PDX series amplifiers are for the true car audio enthusiast - for those who want the best power, sound quality, and efficiency, all from a compact size. Get the most out of your system with Digital PDX.

Features

  • 220W x 4 MAX
  • 150W RMS x 4 [4Ohm@14.4V 1% THD]
  • 150W RMS x 4 [2Ohm@14.4V 1% THD]
  • 300W RMS x 2 [4Ohm@14.4V BTL 1% THD]
  • Low Resistance, High Current Speaker Terminals
  • Stackable Installation
  • Switch-Mode Digital Amplification

Alpine PDX-2.150

Alpine PDX-2.150

Power Amp 2 x 150w rms        

2/1 Channel Power Density Digital Amplifier
Good things come in small, stackable packages. Who knew something so small could pump so much power? The Alpine PDX series amplifiers are for the true car audio enthusiast - for those who want the best power, sound quality, and efficiency, all from a compact size. Get the most out of your system with Digital PDX.

Low Interference
Install these amps anywhere in your vehicle without interference. So you can store an amp or few under your seat, and won't have to worry about interference coming from other electronics in your car environment. Their small footprint and unique stacking capability make them perfectly suited to the hash in-vehicle environment.

Features

  • Class-D
  • 1/2 Channel Operation
  • Stackable Installation Design
  • Thermal Management Processor
  • Adjustable Crossover (HP/LP)
  • MOSFET Power Supply
  •  DC-DC PWM Power Supply
  • MOSFET Final Outputs
  • STAR Circuitry
  • Auto Over-Current Protection
  • Top Mounted Blue LED Power/Status Indicator
  • Integrated Wire and Mounting Screw Terminals
  • One Side Terminal Layout
  • Gold Plated RCA Input Connectors
  • Continuously Adjustable Gain Control
  • Gold Plated Power Screw Terminals
  • 4-Layer Glass Epoxy PC Board
  • Speaker Quick Connect


Specifications

  • CEA-2006 Power Rating (40hm@14.4V = 1%THD+N), S/N 78dBA (Ref. 1W into 4Ohm):150W x 2
  • RMS Power (at 14.4V THD+N,20Hz-20kHz)
  • Per channel into 2 ohms : 150W x 1 (=1%THD+N)
  • Per channel into 4 ohms : 150W x 1 (=1%THD+N)
  • Brigded 4 ohms: 300W x 1 (=1% THD+N)


Dimensions

  •   Heat Sink (WxHxD) mm: 257mm x 192mm x 62mm
  •  

Bass Engine

  •   Crossover Frequency : 30Hz - 400Hz HP/LP/Off (-12dB/oct)


General

  • Frequency Response: 10Hz - 50kHz (+0,-1dB)
  • Signal to Noise (S/N): 100dBA (Reference to Rated Power)
  • Input Sensitivity (For Rated Power): 0.2V to 4.0V (1.0 at Center Detent)
  • Input Impedance: 10k Ohm
  • Power Requirements: 14.4V DC (11V to 16V)
  • Weight: 2.74Kg.

Alpine PDX-5

Alpine PDX-5
Power Up! Save Space.
Good things come in small, stackable packages. Who knew something so small could pump so much power? The Alpine PDX series amplifiers are for the true car audio enthusiast - for those who want the best power, sound quality, and efficiency, all from a compact size. Get the most out of your system with Digital PDX.
 
SPECIFICATIONS
 
CEA-2006 Power Ratings
  •  CEA-2006 Power Rating: (4 I? @14.4V % THD+N, S/N: 77dBA, ref:1W into 4 I? and 2I? for mono ch.) 75W x 4 + 300W x 1
RMS Power Ratings
  •  Per channel into 4 Ohms: (@ 14.4V %THD+N, 20Hz - 20kHz @ 4I? for 4ch.) 75W x 4
  •  Per channel into 2 Ohms: (@ 14.4V %THD+N, 20Hz - 200Hz @ 2I? for Mono ch.) 300W x 1
Sound Tuning
  •  Crossover: 30Hz-400Hz, -12dB/oct. (Low-Pass/High-Pass for 4CH), 20Hz-200Hz, -24dB/oct. (Low-Pass for Mono)
  •  Subsonic Filter: 15Hz (Fixed), -24dB/oct. for Mono
Dimensions
  •  Foot Print (WxHxD) mm: 257mm x 62mm x 192mm
  •  Heat Sink (WxHxD) mm: 257mm x 62mm x 192mm
 
FEATURES
 
Install
  •  Terminal Layout: One-Side
  •  Screw Mount / Wire Cover: Insert Screw Terminals and Plug-in Speaker Terminals
  •  Mounting Design: Stacking Install
General
  •  Amplifier Type: Class-D
  •  Channel Design: 4 Channel + 1 Channel (Mono)
  •  Thermal Control: Thermal Management Control
  •  Power Supply: DC-DC PWM Power Supply
  •  Power Supply Design: Direct FET Power
  •  Board Circuitry: STAR Circuitry
  •  Current Protection: Over-Current, Over-Voltage and Thermal Protection
  •  Power Indicator: Top/Side Mounted LED Power/Status Indicator
  •  RCA Output: Gold Plated RCA Input Connectors
  •  Crossover: Adjustable Low-Pass/High-Pass
  •  Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals
  •  Pre-Amp Stage: Discrete
  •  Board Design: Dual Sided Glass Epoxy PC Board
  •  Gain Control: Continuously Adjustable Gain Control