Alpine PDX-4.100M

Alpine PDX-4.100M

Alpine introduces its award-winning line of Marine sound system products. Whether you want a simple sound upgrade for your runabout, a high-quality system for your cruiser or sportboat, or huge output for your ski/wakeboard boat, there is an Alpine Marine system just right for you. Constructed from UV resistant materials and finish, and corrosion resistant hardware, these bad boy amps are ready to rough the seas.

Overview
  • Class-D
  • 4/3/2 Channel Operation
  • Stackable Installation Design
  • RMS Power (at 14.4V THD+N, 20Hz - 200Hz)
  • Per channel into 4 ohms: 100W x 4 (0.08% THD)
Marine Ready
  • 100WRMS x 1 @ 4ohm/2ohm (CEA-2006)
  • Marine Coating System
  • Salt/Fog (ASTM B117) Certified
  • UV (ASTM G154/D4329) Certified
  • 4/3/2 Channel
  • Low-Pass Crossover 50Hz-200Hz variable
  • HP/LP crossover 30Hz-400Hz variable
  • "Quick connect" High Current speaker terminals
 
Dimensions
  •  Heat Sink (WxHxD) mm: 257mm x 192mm x 62mm

Alpine SPR-M700

Alpine's exciting new Marine Speakers let you enjoy Alpine quality sound on the water. The SPR-M700W is a 7" coaxial speaker that will deliver crisp, clean, powerful sound.

SILVER IN COLOUR
 
Features
  • 7” Coaxial 2-Way Marine Speaker
  • High Temp ABS Frame
  • Poly Mica Woofer Cone
  • Ultra UV (Centrix 813) Resistant Grill
  • 1” Titanium Dome Tweeter
  • Frequency Response: 45Hz - 22khz
  • Mouting Depth 93.1mm
  • Built in 12dB/6dB Crossover Network
  • 50 Watts RMS Power Handling
Specifications

General
  • Sensitivity: 90dB / W(1m)
  • Impedence: 4 Ohms
  • Frequency Response: 45Hz - 22kHz
Dimensions
  • Woofer Mounting Depth (mm): 93.1mm
  • Woofer Mounting Diameter (mm): 162.6mm
  • Woofer Diameter (mm): 195.9mm
Power Handling
  • Power Handling Capacity (Peak): 150 Watts
  • Power Handling Capacity (RMS): 50 Watts
  • CEA-2031 Power Rating: 50 Watts

     

Alpine SPX-Z18T

Alpine SPX-Z18T

 Ring radiator tweeter / Cross-cut wood fiber cone / High-precision passive network

Just as we’ve done with every other component in the system, we’ve cut no corners in the final stage. The ring radiator type tweeter realizes exceptionally precise low-distortion sound and ultra-high frequency response thanks to its linear diaphragm movement. The center phase plug focuses the waveforms for accurate sound imaging and staging. The painstakingly crafted cross-cut wood fiber cone for the mid-low speaker, is made from a carefully blend of five different kinds of wood fibers. In order to reduce unnecessary resonance vibration, the cone has cross-cut grooves to trap resonant frequencies. This results in minimal dividing resonance vibrations and peaks in the sound. In addition, the ultra-high-precision passive network lets you correct for phase difference and make meticulous time difference corrections to compensate for speaker position. With over 1,000 different tuning combinations, the system can be customized and optimized for absolutely any vehicle. The crossover also provides bi-amp/ tri-amp capability for even greater system flexibility and sound tuning.
 
Features & Specifications
  • Type:  3-way separate
  • Speaker Unit: 3.9 cm tweeter with ring radiator, 10 cm mid-range woofer with cross-cut wood fiber cone, 18 cm woofer with cross-cut wood fiber cone / 3-way crossover network unit
  • Frequency band width: 35Hz – 60kHz
  • Peak power input: 200W
  • RMS input: 50W
  • Impedance: 4Ohms
  • Weight: 2 kg (woofer) / 0.55 kg (mid-range woofer / 0.4 kg (tweeter)

     

Alpine SPX-17REF

Alpine SPX-17REF

 Superior Sound

The goal of the SPX17REF/SPX-13REF series to produce speakers with incredible sound quality, at a more affordable price point. Like the PRO series, the focus was developing a speaker system that delivered an unbelievable dynamic musical experience. SPX17REF/SPX-13REF speakers allow for accurate reproduction and deep bass performance. These advanced drivers bring out all the detail in any type of music for an outstanding sound experience
 
SPECIFICATIONS
 
Power Handling
  • CEA-2031 Power Rating: 75 Watts
  • Power Handling Capacity (RMS): 75 Watts
  • Power Handling Capacity (Peak): 225 Watts
Dimensions
  • Tweeter Mounting Diameter (mm): 36mm
  • Tweeter Mounting Depth (mm): 16mm
  • Woofer Diameter (mm): 161.20
  • Woofer Mounting Diameter (mm): 134mm
  • Woofer Mounting Depth (mm): 65mm
  • Crossover Size (mm): 146mm x 91mm x 34mm
 
General
  • Frequency Response: 35Hz - 40kHz
  • Impedence: 4 Ohms
  • Sensitivity: 88dB /W(1m)
FEATURES
 
Tweeter
  • Tweeter Type: Smooth, 1'' Ring Tweeter with Tuned Chamber
  • Mounting Design: 53/64'' Depth Mounting Design (with cup)
  • Application Type / Design Detail: External / Swivel Tweeter Mounting Kit
  • Magnet Material: Low Disortion Triple-Stack Neodymium Motor Structure
Woofer
  • Dustcap Detail: Aluminum Cone
  • Cone Material: Cross-Rib Aluminum Cone with VC & Surround Coupling Reinforced
  • Motor Technology: Heat Transfer Motor/Frame Coupling
  • Voice Coil Type: High Temp VC CCAW Wire on 39mm Aluminum Former
  • Cooling: Airflow Management
  • Magnet: High Grade Neodymium Magnet
  • Mounting: Shallow Mounting Design
  • Frame: Machined Low-Carbon Steel U-Yoke
Crossover Network
  • Grade: Expert Grade Network
  • Case Design: Audiophile Layout
  • Attenuation Control: 4 - Level
  • Mounting: Easy-Mount Screw Terminals

     

Alpine SPX-17PRO

Alpine SPX-17PRO

The Type-X PRO speaker embodies Alpine's no-compromise attitude to speaker performance and design. The award-winning Type-X PRO component speakers have been engineered from the ground up with the audio enthusiast in mind. They utilize advanced technologies and exotic materials often found in high-end home audio speakers to deliver dynamic sound quality with exceptional accuracy. This means you get to hear stunning musical detail, amazing lifelike sound, and incredible imaging. With Type-X PRO speakers, Alpine gives you a true sound experience in the automotive environment.

SPECIFICATIONS
 
Power Handling
  •  CEA-2031 Power Rating: 100 Watts
  •  Power Handling Capacity (RMS): 100 Watts
  •  Power Handling Capacity (Peak): 300 Watts
Dimensions
  •  Tweeter Mounting Diameter (mm): 47mm
  •  Tweeter Mounting Depth (mm): 18mm
  •  Woofer Diameter (mm): 153mm
  •  Woofer Mounting Diameter (mm): 134mm
  •  Woofer Mounting Depth (mm): 64mm
  •  Crossover Size (mm): 112mm x 162mm 32mm
 
General
  •  Frequency Response: 35Hz - 60kHz
  •  Impedence: 4 Ohms
  •  Sensitivity: 88dB /W(1m)
FEATURES
 
Tweeter
  •  Tweeter Type: Smooth, 1-1/4'' Ring Tweeter with Tuned Chamber and Integrated Wave Guide
  •  Mounting Design: 13/16'' Depth Mounting Design (with cup)
  •  Application Type / Design Detail: External / Flush Tweeter Mounting Kit
  •  Magnet Material: Low Disortion High-Grade Neodymium Motor Structure with Copper Shorting Cap
Woofer
  •  Dustcap Detail: Machined Aluminum Phase Plug with Direct Heat Transfer Heat-Sink
  •  Cone Material: Hybrid Cross-Rib Glass Fiber Cone
  •  Motor Technology: Heat Transfer Motor/Frame Coupling
  •  Voice Coil Type: High Temp VC CCAW Wire on 39mm Aluminum Former
  •  Cooling: Airflow Management
  •  Magnet: High Grade Neodymium Magnet
  •  Mounting: Shallow Mounting Design
  •  Frame: Machined Low-Carbon Steel U-Yoke
Crossover Network
 Grade: Audiophile / Expert Grade Network
 Case Design: Audiophile Layout
 Attenuation Control: 4 - Level
 Mounting: Easy-Mount Screw Terminals

 

Alpine SPX-13REF

Alpine SPX-13REF
The goal of the SPX17REF/SPX-13REF series to produce speakers with incredible sound quality, at a more affordable price point. Like the PRO series, the focus was developing a speaker system that delivered an unbelievable dynamic musical experience. SPX17REF/SPX-13REF speakers allow for accurate reproduction and deep bass performance. These advanced drivers bring out all the detail in any type of music for an outstanding sound experience.
Features and Specification
 
Power Handling
  •  CEA-2031 Power Rating: 60 Watts
  •  Power Handling Capacity (RMS): 60 Watts
  •  Power Handling Capacity (Peak): 180 Watts
Dimensions
  •  Tweeter Mounting Diameter (mm): 36mm
  •  Tweeter Mounting Depth (mm): 16mm
  •  Woofer Diameter (mm): 130mm
  •  Woofer Mounting Diameter (mm): 115mm
  •  Woofer Mounting Depth (mm): 60.5mm
  •  Crossover Size (mm): 146mm x 91mm x 34mm
General
  •  Frequency Response: 40Hz - 40kHz
  •  Impedence: 3.6 Ohms
  •  Sensitivity: 88dB /W(1m)
FEATURES
 
Tweeter
  •  Tweeter Type: Smooth, 1'' Ring Tweeter with Tuned Chamber
  •  Mounting Design: 53/64'' Depth Mounting Design (with cup)
  •  Application Type / Design Detail: External / Swivel Tweeter Mounting Kit
  •  Magnet Material: Low Disortion Triple-Stack Neodymium Motor Structure
Woofer
  •  Dustcap Detail: Aluminum Cone
  •  Cone Material: Cross-Rib Aluminum Cone with VC & Surround Coupling Reinforced
  •  Motor Technology: Heat Transfer Motor/Frame Coupling
  •  Voice Coil Type: High Temp VC CCAW Wire on 39mm Aluminum Former
  •  Cooling: Airflow Management
  •  Magnet: High Grade Neodymium Magnet
  •  Mounting: Shallow Mounting Design
  •  Frame: Machined Low-Carbon Steel U-Yoke
Crossover Network
 Grade: Expert Grade Network
 Case Design: Audiophile Layout
 Attenuation Control: 4 - Level
 Mounting: Easy-Mount Screw Terminals

 

Alpine SPX-13PRO

Alpine SPX-13PRO

Uncompromising sound quality
The Type-X PRO speaker embodies Alpine's no-compromise attitude to speaker performance and design. The award-winning Type-X PRO component speakers have been engineered from the ground up with the audio enthusiast in mind. They utilize advanced technologies and exotic materials often found in high-end home audio speakers to deliver dynamic sound quality with exceptional accuracy. This means you get to hear stunning musical detail, amazing lifelike sound, and incredible imaging. With Type-X PRO speakers, Alpine gives you a true sound experience in the automotive environment.

SPECIFICATIONS
 
Power Handling
  •  CEA-2031 Power Rating: 80 Watts
  •  Power Handling Capacity (RMS): 80 Watts
  •  Power Handling Capacity (Peak): 240 Watts
Dimensions
  •  Tweeter Mounting Diameter (mm): 47mm
  •  Tweeter Mounting Depth (mm): 18mm
  •  Woofer Diameter (mm): 130mm
  •  Woofer Mounting Diameter (mm): 115mm
  •  Woofer Mounting Depth (mm): 59.4mm 
 Crossover Size (mm): 112mm x 162mm 32mm
 
General
  •  Frequency Response: 40Hz - 60kHz
  •  Impedence: 4 Ohms
  •  Sensitivity: 87dB /W(1m)
FEATURES
 
Tweeter
  •  Tweeter Type: Smooth, 1-1/4'' Ring Tweeter with Tuned Chamber and Integrated Wave Guide
  •  Mounting Design: 13/16'' Depth Mounting Design (with cup)
  •  Application Type / Design Detail: External / Flush Tweeter Mounting Kit
  •  Magnet Material: Low Disortion High-Grade Neodymium Motor Structure with Copper Shorting Cap
Woofer
  •  Dustcap Detail: Machined Aluminum Phase Plug with Direct Heat Transfer Heat-Sink
  •  Cone Material: Hybrid Cross-Rib Glass Fiber Cone
  •  Motor Technology: Heat Transfer Motor/Frame Coupling
  •  Voice Coil Type: High Temp VC CCAW Wire on 39mm Aluminum Former
  •  Cooling: Airflow Management
  •  Magnet: High Grade Neodymium Magnet
  •  Mounting: Shallow Mounting Design
  •  Frame: Machined Low-Carbon Steel U-Yoke
Crossover Network
 Grade: Audiophile / Expert Grade Network
 Case Design: Audiophile Layout
 Attenuation Control: 4 - Level
 Mounting: Easy-Mount Screw Terminals

 

Alpine SPJ-691C3

Alpine SPJ-691C3

The new entry level 'J' speaker series are competitively priced and offer uncompromising quality and sound performance that Alpine is famous for. Featuring a hybrid pearl-mica injection-type cone and air-injected rubber surround, these speakers are not only aesthetically appealing but deliver ultra bass and midrange, plus the balanced titanium dome tweeters ensure highs are crisp and clean. 

Specifications
  • 400W Peak Power Handling
  • 60W RMS Power Handling
  • Frequency Response: 30Hz - 30kHz
  • 4 ohm Impedance
  • 70.4mm Mounting Depth

     

Alpine SPJ-161C2

Alpine SPJ-161C2

The entry level Type-J speaker series are an affordable way to upgrade your factory speakers or even to start building a sound system, for the excellent sound quality and performance you expect from Alpine. 

Built to handle all bass levels down to the lowest, their high efficiency means that you enjoy powerful bass sounds without distortion.
 
Specifications:
  • 250W Peak Power Handling
  • 50W RMS Power Handling
  • Frequency Response: 30Hz - 30kHz
  • 4 ohm Impedance
  • 44mm Mounting Depth

Alpine SPJ-160C2

Alpine SPJ-160C2

 The new Type-J speakers are an affordable way to upgrade your factory speakers, for the high performance sound quality you expect from Alpine.

  • Peak power: 200W 
  • RMS Power: 50W
  • Normal Impedance: 4 Ohm 
  • Frequency Response 30Hz-28kHz
QUALITY OVER QUANTITY
Just because you want better sound in your car, doesn't mean you have to break your budget. The Type-J speakers are perfect, affordable option if you simply need replacement speakers or even want to start building a sound system.
 
ALPINE GIVES MORE BASS
Type J speakers gather you to every bass level.Outstandingly, Type J's are able to reach the highest efficiency of music instruments that leads you to the next level of sound quality.