Alpine SWR-1542D

Alpine SWR-1542D

The Type-R subwoofer features an ultra long linear excursion for dynamic, realistic sound. Exclusive cooling technologies contribute to huge power handling capabilities. You can depend on the Type-R to compliment your system with deep, accurate bass.

SPECIFICATIONS
 
Power Handling
  •  Power Range: 400 - 750 Watts
  •  RMS Power Handling: 750 Watts
  •  Peak Power Handling: 2000 Watts
Dimensions
  •  Mounting Depth: 234 mm (9.2'')
  •  Mounting Diameter: 349 mm (13.8'')
  •  Displacement: 0.123 cu. ft. (Front Mount)
  •  Added Volume: 0160 cu. ft. (Reverse Mount, Magnet Out)
General
  •  Frequency Response: 20Hz - 400Hz
FEATURES
 
Diaphram
  •  Material: Kevlar Reinforced Pulp Fiber
  •  Design: 2-Piece Structural Parabolic
Surround
  •  Material: Injected Molded Santoprene
  •  Design: High Amplitude Multi-Roll
Spider
  •  Material: Nomex
  •  Design: Mirrored Progressive
Voice Coil
  •  Material: 180A High Temp Wire on Spiral Cut Aluminum Former
  •  Design: 4-Layer Dual Voice Coil
Motor Structure
  •  Pole Geometry: Compound Radius Curve
  •  Configuration: Radial Vented VC Heat Sink and Airflow Management System
Frame
  •  Material: Cast Aluminum
  •  Design: Perimeter Vented Heat Transfer
Terminals
  •  Layout: One Side
  •  Design: Heavy Duty 8 gauge Push with Housing, Banana Plug Jumper
Tinsel Leads
 Design: Reinforced Layer Spider Integration
Gasket
  •  Design: Concealed Mount Gasket System

Alpine SWR-M100

Alpine SWR-M100

 No sound system is complete without the perfect sub for complimentary bass. Don't deprive your boat from the absolute best sound you can get. Alpine presents the SWR-M100, a 10-inch marine subwoofer part of the all-new marine lineup.

The SWR-M100's high excursion capabilities mean deep, high-output bass for great on-water performance, no matter where it is installed!
 
SPECIFICATIONS
 
Power Handling
  • CEA-2006 Power Rating: 300 Watts
  • RMS Power Handling: 300 Watts
  • Peak Power Handling: 900 Watts
Dimensions
  • Mounting Depth: 144.72 mm (5-11/16'')
  • Mounting Diameter: 229 mm (9-1/32'')
  • Displacement: 0.083ft cu. ft. (Front Mount)
  • Added Volume: 0.055 cu. ft. (Reverse Mount, Magnet Out)
FEATURES
 
Diaphram
  • Material: Molded Polypropylene
  • Design: 2-Piece Structural Parabolic
Surround
  • Material: Injection Molded Sanoprene
  • Design: High Amplitude Multi-Roll
Spider
  • Material: Nomex
  • Design: Progressive
Voice Coil
  • Material: High Temp. Copper Wire on TIL Former
  • Design: 4-Layer Single Voice Coil
Motor Structure
  • Pole Geometry: Compound Radius Curve
  • Configuration: Airflow Management System
Frame
  • Material: Injection Molded Polypropylene
  • Design: Custom High Strength 5-Leg
Terminals
  • Layout: One Side
  • Design: 2-Way, Insert & Quick-Connect Terminals
Tinsel Leads
  • Design: 16ga. Stranded Leads, Insulated
Gasket
  • Design: Rubber Mounting Gasket 

Alpine SWR-1522D

Alpine SWR-1522D

 Alpine Type-R subwoofers play loud, clean, and long. The Type-R's are designed from HAMR Engineering, Alpine's exclusive subwoofer solution for cooler operation, longer life, and tight, accurate bass. The main philosophy behind HAMR Engineering is to ensure the ultimate sound quality and performance through the use of highly advanced materials and patented design technologies such as magnetic, structural finite element analysis, and a 3rd generation CRC motor structure. The Type-R subwoofer features an ultra long linear excursion for dynamic, realistic sound. Exclusive cooling technologies contribute to huge power handling capabilities. You can depend on the Type-R to compliment your system with deep, accurate bass.

SPECIFICATIONS
 
Power Handling
  •  Power Range: 400 - 750 Watts
  •  RMS Power Handling: 750 Watts
  •  Peak Power Handling: 2000 Watts
Dimensions
  •  Mounting Depth: 234 mm (9.2'')
  •  Mounting Diameter: 349 mm (13.8'')
  •  Displacement: 0.123 cu. ft. (Front Mount)
  •  Added Volume: 0.160 cu. ft. (Reverse Mount, Magnet Out)
General
  •  Frequency Response: 18Hz - 400Hz
FEATURES
Diaphram
  •  Material: Kevlar Reinforced Pulp Fiber
  •  Design: 2-Piece Structural Parabolic
Surround
  •  Material: Injected Molded Santoprene
  •  Design: High Amplitude Multi-Roll
Spider
  •  Material: Nomex
  •  Design: Mirrored Progressive
Voice Coil
 Material: 180A High Temp Wire on Spiral Cut Aluminum Former
 Design: 4-Layer Dual Voice Coil
Motor Structure
  •  Pole Geometry: Compound Radius Curve
  •  Configuration: Radial Vented VC Heat Sink and Airflow Management System
Frame
  •  Material: Cast Aluminum
  •  Design: Perimeter Vented Heat Transfer
Terminals
  •  Layout: One Side
  •  Design: Heavy Duty 8 gauge Push with Housing, Banana Plug Jumper
Tinsel Leads
  •  Design: Reinforced Layer Spider Integration
Gasket
  •  Design: Concealed Mount Gasket System

Alpine SWR-T10

Alpine SWR-T10

The Type-R Thin subwoofer series combines the intense low-bass performance and ground-shaking output of the traditional Type-R subwoofers in a thin package optimized for extremely small enclosures.

 
SPECIFICATIONS
 
Power Handling
  • CEA-2031 Power Rating: 600W
  • Power Range: 300 - 600 Watts
  • RMS Power Handling: 600W
  • Peak Power Handling: 1800W
Dimensions
  • Mounting Depth: 82 mm (3.25'')
  • Mounting Diameter: 231 mm (9.1'')
  • Displacement: 0.07 cu. ft (Front Mount)
  • Added Volume: 0.04 cu. ft. (Reverse Mount, Magnet Out)
General
  • Frequency Response: 28Hz - 200Hz
FEATURES
 
Diaphram
  • Material: Aluminum
  • Design: Structural Parabolic w/ Force Transfer Assembly
Surround
  • Material: Injected Molded Santoprene
  • Design: FEA-Optimized High Amplitude Mutli-Roll (H.A.M.R.) (Patent Pending)
Spider
  • Material: Thermoplastic Elastomer (TPE)
  • Design: Co-Molded Regressive w/ Integrated Tinsel Leads
Voice Coil
  • Material: 220C Edge-Wound Copper Ribbon Wire
  • Design: Oversized 100mm (4'') Underhung Voice Coil
Motor Structure
  • Pole Geometry: FEA-Optimized Dual Compound Radius Curve w/ Pass Through Gap Design 
  • Configuration: Radial Vented VC Heat Sink & Shorting Sleeve w/ Airflow Management System 
Frame
  • Material: Cast Aluminum
  • Design: Direct-Couple Shorting Sleeve/Heatsink and Frame Design
Terminals
  • Layout: One Side
  • Design: Heavy Duty Gold-Plated Insert Block Terminals
Tinsel Leads
  • Design: Woven Spider Integration Design
Gasket
  • Design: Concealed Mount Gasket System 

Alpine SWS-12D4

Alpine SWS-12D4

 The SWS-12D4 can handle up to 500 watts of RMS power, so you can drive it hard and it'll keep up. The tough 12" Kevlar® treated cone stays rigid under pressure, while its rubber HAMRS surround allows for maximum excursion. Its dual 4-ohm voice coils allow for wiring flexibility which helps if you plan on adding another subwoofer down the line. Also, it rocks in both sealed and ported boxes, so you can choose an enclosure that suits your tastes.

Highlights:
  • 12" subwoofer with dual 4-ohm voice coils
  • Kevlar reinforced pulp cone with HAMRS Santoprene rubber surround
  • frequency response: 26-200 Hz
  • power handling: 150-500 watts RMS (250 watts per coil)
  • peak power: 1,500 watts
  • sensitivity: 86.5 dB
  • top-mount depth: 5-13/16"
  • sealed box volume: 0.71-1.06 cu. ft.
  • ported box volume: 1.06-1.56 cu. ft.

Alpine SWS-12D2

Alpine SWS-12D2

More Excursion = More Output

The new FEA-Optimized Motor Structure together with our revolutionary HAMR Suspension Design gives the new Type-S Subwoofers the highest X-max and SPL output in the category.
 
With a real-world, measured 15mm of one-way X-max, the new Type-S Subwoofers deliver best-in-class output, ultra-low distortion, and unparalleled sound quality. Borrowing the HAMR suspension from the Type-R, these new Type-S subwoofers have over 30mm of one-way stroke, for a total of nearly 3” of peak-to-peak excursion!
 
Underhung Design = More Control
 
The new dual-sided CRC motor structure mimics that of the Type-R Thin subwoofers, providing these subs with an ultra-linear, highly controlled sound. This patented design creates a perfectly symmetrical and linear magnetic field for the coil to travel in, minimizing distortion while enhancing sound quality. The high-grade double-stacked magnets ensure adequate clearance for high excursion while providing the energy needed to power these beasts.
 
Keep it Cool = Keep it Playing
 
Alpine’s Patented Airflow Management System helps minimize power compression and ensures reliable long playing time by actively wicking output-robbing heat away from the Voice Coil.
 
The massive 65mm (2.6”) diameter voice coil provides nearly double the surface area when compared to the previous 38mm (1.5”) voice coil. Similar to having a larger intercooler in a race car, the larger surface area allows for the voice coil to cool faster, ensuring that your bass tracks cleanly and reliably, without compression.
 
Massive Voice Coils = Maximum Durability
 You can tell that Alpine's bass pedigree runs deep in their latest line of Type-S subwoofers. Using technology found in their higher end subs, this sub will rock your system and add depth to your favorite tracks. You'll love the detail it brings to a bass guitar and the impact you'll feel when a kick drum hits. Throw a couple of these in your ride and prepare to be amazed by unrelenting bass.
 
Highlights:
  • 12" subwoofer with dual 2-ohm voice coils
  • Kevlar reinforced pulp cone with HAMRS Santoprene rubber surround
  • frequency response: 26-200 Hz
  • power handling: 150-500 watts RMS (250 watts per coil)
  • peak power: 1,500 watts
  • sensitivity: 86.4 dB
  • top-mount depth: 5-13/16"
  • sealed box volume: 0.71-1.06 cu. ft.
  • ported box volume: 1.06-1.56 cu. ft.

Alpine SWS-10D4

Alpine SWS-10D4

Alpine's Type-R subwoofers will bring big bass to just about any vehicle. The SWR-10D4 10" sub features a cone made from Kevlar treated pulp — the same material used to make bulletproof vests — and its durable HAMR Santoprene surround allows for huge amounts of excursion. This sub was built for bassheads that want the best of both worlds, Accurate response and otherworldly thump.

Highlights:
  • 10" subwoofer with dual 4-ohm voice coils
  • Kevlar reinforced pulp cone with HAMRS Santoprene rubber surround
  • frequency response: 26-200 Hz
  • power handling: 300-1,000 watts RMS (500 watts per coil)
  • peak power: 3,000 watts
  • sensitivity: 82.1 dB
  • top-mount depth: 5-7/8"
  • sealed box volume: 0.48-0.93 cu. ft.
  • ported box volume: 0.83-1.38 cu. ft.

Alpine SWS-10D2

Alpine SWS-10D2
They’re so good, we had to redesign the Type-R
The new fourth-generation Type-S subwoofers have undergone a revolutionary redesign, leaning heavily on patented technologies developed for the Type-R series. The result is a subwoofer that is so good we had to redesign the Type-R. These new subwoofers redefine the expectations in their class. Altogether, they offer significantly improved output, deeper bass extension, more control and even greater power handling.

Alpine SWR-12D4

Alpine SWR-12D4

 Extreme bass fits in more places

The Type-R Subs have been designed to offer more installation flexibility and application versatility to build the ideal sound system. At 149 mm for the 10” (25 cm) and 162 mm for the 12” (30 cm), these new designs offer even greater output capability.
 
FEATURES

Diaphram
Material: Oversized Hairline-Textured Mica Poly Dustcap w/ Kevlar Reinforced Pulp Paper Cone Body
Design: 2-Piece Parabolic
Surround
  • Material: Injected Molded Santoprene®
  • Design: High Amplitude Multi-Roll H.A.M.R Surround Design
Spider
  • Material: Conex
  • Design: 10 Segment High-Roll Progressive Design
Voice Coil
  • Material: 180ºC High Temp Wire on Sprial-Cut Aluminum Bobbin
  • Design: 4-Layer Dual Voice Coil
Motor Structure
  • Pole Geometry: FEA Optimized Design w/ Compound Radius Pole Geometry
  • Configuration: Radial Vented VC Heat Sink and Airflow Management System 
Frame
  • Material: Cast Aluminum
  • Design: Perimeter Vented Heat Transfer, Integrated Shorting Sleeve and Airflow Management System
Terminals
  • Layout: One Sided
  • Design: Heavy Duty 8 gauge Push with Housing, Banana Plug Jumper
Tinsel Leads
  • Design: Reinforced Layer Spider Integration 
Gasket
  • Design: Concealed Mount Gasket System
 
SPECIFICATIONS

Power Handling
  • PowerRange: 300W - 1000 Watts
  • RMS Power Handling: 1000W
  • Peak Power Handling: 3000W
Dimensions
  • Mounting Depth: 162mm (6.375'')
  • Mounting Diameter: 275mm (10.875'')
  • Displacement: 0.10 cu. Ft.
  • Added Volume: 0.09 cu. ft. (Reverse Mount, Magnet Out)
General
  • Frequency Response: 24Hz - 200Hz

Alpine SWR-12D2

Alpine SWR-12D2

 SWR-12D2 - 12'' Type-R Subwoofers

These redesigned fifth-generation Type-R subwoofers include an abundance of enhanced features to achieve staggering power handing capabilities, cleaner output, deeper bass extension and ultra-responsive control than ever before.
 
FEATURES
Diaphram
  • Material: Oversized Hairline-Textured Mica Poly Dustcap w/Kevlar Reinforced Pulp Paper Cone Body
  • Design: 2-Piece Parabolic Surround
  • Material: Injected Molded Santoprene®
  • Design: High Amplitude Multi-Roll H.A.M.R Surround Design
Spider
  • Material: Conex
  • Design: 10 Segment High-Roll Progressive Design
Voice Coil
  • Material: 180ºC High Temp Wire on Sprial-Cut Aluminum Bobbin
  • Design: 4-Layer Dual Voice Coil
Motor Structure
  • Pole Geometry: FEA Optimized Design w/ Compound Radius Pole Geometry
  • Configuration: Radial Vented VC Heat Sink and Airflow Management System
Frame
  • Material: Cast Aluminum
  • Design: Perimeter Vented Heat Transfer, Integrated Shorting Sleeve and Airflow Management System
Terminals
  • Layout: One Sided
  • Design: Heavy Duty 8 gauge Push with Housing, Banana Plug Jumper
Tinsel Leads
  • Design: Reinforced Layer Spider Integration
Gasket
  • Design: Concealed Mount Gasket System
SPECIFICATIONS
 
Power Handling
  • Power Range: 300W - 1000 Watts
  • RMS Power Handling: 1000W
  • Peak Power Handling: 3000W
Dimensions
  • Mounting Depth: 162mm (6.375'')
  • Mounting Diameter: 275mm (10.875'')
  • Displacement: 0.10 cu. Ft.
  • Added Volume: 0.09 cu. ft. (Reverse Mount, Magnet Out)
General
  • Frequency Response: 24Hz - 200Hz