SVS SoundPath Tri-Band Wireless Audio Adapter
$0.00
SVS SoundPath Tri-Band Wireless Audio Adapter
description
Transmits a pristine LFE or full-range stereo audio signal up to 130-feet at 16-bit/48KHz with ultra-low latency. Tri-Band technology auto-switches between three wireless bands for use in crowded wireless signal areas where single-band wireless transmitters are prone to interference. Wirelessly connects subwoofers, powered speakers, and more. Setup of the SoundPath Tri-Band Wireless Audio Adapter takes minutes. Once installed, it auto-switches between the 2.4 GHz, 5.2 GHz, and 5.8 GHz wireless bands for uninterrupted audio signal transfer. Impervious to interference from Bluetooth, Wi-Fi routers, wireless security systems, cameras, and other wireless devices.
Technical Specs:
Transmitter:
Technical Specs:
Transmitter:
- Analog input level: maximum 2Vrms
- Minimum power: 5V @0.5A
- Analog output level: maximum 1Vrms
- Minimum power requirement: 4.75V @0.3A
- Dimensions: W 3.15" (80mm) x D 2.36" (60mm) x H 1.02 (26mm)
- Weight: 1.25 lbs
- Deters against against both in and out of band sources of interference, including: microwaves, wireless cameras, cordless phones, Bluetooth devices and more
- Operates seamlessly alongside 802.11b/g/n Wi-Fi
- Automatic receiver antenna diversity minimizes fading and multi-path effects
- Seamless RF band/channel switching
- RF Band – Tri-Band (auto switching) (2.4/5.2/5.8 GHz) – finds the best solution and connects
- Three RF frequency ranges for each frequency band:
- Band 1: 2400-2483.5MHz
- Band 2: 5150-5250MHz
- Band 3: 5725-5875MHz
- 22 Mbps wireless air data rate
- Sample Rate: 48kHz
- THD+N: -70dB (10Hz – 20kHz)
- S/N: +105dB (10Hz - 20kHz)
- Cross-talk: >75dB @1KHz
- Frequency Response: 6Hz – 20 kHz +/- 0.5 dB
- Audio Latency: < 19ms
- Transmission Range 130’ (line of sight)
- Wireless Transmitter
- Wireless Receiver
- Two AC Power Adapters
- Two USB cables for AC power adapter
- Two Mono RCA to Mono RCA cables
- Two Velcro
- Quickstart Guide
