Blustream DA11ABL-WP-EU-V2
Blustream DA11ABL-WP-EU-V2
Bluetooth & Analogue Audio Dante® Wall Plate
The DA11ABL-WP-EU-V2 is a multi-input / output wall plate to convert Bluetooth and analogue audio within a digital Dante® networked audio system. The DA11ABL-WP-EU-V2 converts 2 input channels of Bluetooth or unbalanced audio to Dante® digital audio, and 2 channels of Dante® audio to 2 x output channels of unbalanced audio.
The DA11ABL-WP-EU-V2 is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport and magnetic faceplate design allows for both UK & EU backbox compatibility. The DA11ABL-WP-EU-V2 is the ideal BYOD interface to allow any Bluetooth device to stream audio wirelessly to a Dante® audio system.
Specifications
• Audio Input Connectors: 1 x Analogue Left / Right audio (3.5mm stereo jack)
• Audio Output Connectors: 2 x Analogue RCA (Left / Right)
• Network Connectors: 1 x PoE Dante® Ethernet Connection (RJ45)
• Bluetooth: Bluetooth V5.0 - SBC / MP3 / AAC / APT-X / APTX-LL / APTX-HD, 44.1K-48KHz 16 / 24Bit
• Configuration Switches: 1 x Push button (connect / selection)
• Firmware Upgrade: 1 x Micro-USB UART port
• Module Dimensions (W x H x D): 74mm x 74mm x 50mm (without faceplate)
• Faceplate Dimensions (W x H x D): 85mm x 85mm x 5mm
• Cut Out Dimensions (W x H x D): 52mm x 55mm x 38mm
• Mounting Hole Spacing: UK 60mm CTC, EU 60mm CTC
• Backbox Requirements: UK single gang backbox / EU single gang backbox
• Power Supply: Class 1 IEEE 802.3af POE PD or 12V/1A DC, 2-Pin Phoenix connector
