Blustream IP200UHD-RX IP Multicast UHD Video Receiver
$0.00
Blustream IP200UHD-RX IP Multicast UHD Video Receiver
description
The IP200UHD-RX is an industry leading 4K HDCP 2.2 HDMI video scaling receiver that using visually lossless compression technology delivers HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture.
KEY FEATURES:
SPECIFICATIONS:
KEY FEATURES:
- Advanced UHD video over 1GB Network
- Virtually unlimited system size
- Extends HDMI up to a distance of 100m over a single CAT cable
- Video up-scaling and down-scaling
- Supports up to 4K 30Hz UHD video output
- Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
- Advanced signal management for independent routing of IR, RS-232, USB/KVM, audio and video
- PoE (Power over Ethernet) to power Blustream products from PoE switch
- HDCP2.2 compliant with advanced EDID management
- Analogue L/R audio breakout
- LAN loop-out for one-to-many extender mode
- Local 24-56V power supply (should Ethernet switch not support PoE) - sold separately
- Features 4 operational modes:
- Matrix distribution (requires 1Gb network switch)
- Video wall (requires 1Gb network switch)
- One-to-one HDMI extender (No network switch required)
- One-to-many HDMI extender (No network switch required)
SPECIFICATIONS:
- Video Input Connectors: 1x LAN RJ45 connector,
- Video Output Connectors: 1x HDMI Type A, female
- Audio Output Connectors: 2x RCA L/R Analogue audio
- Ethernet port: 1x LAN RJ45 connector (video extension)
- RS-232 Serial port: 1x 3-Pin Phoenix connector
- USB/KVM Port: 2x USB - Type A
- IR Input ports: 1x 3.5mm stereo jack
- IR Output ports: 1x 3.5mm mono jack
- Firmware Update (MCU): 1x Micro-USB
- Mounting kit included
- Dimensions (W x D x H ): 190mm x 114mm x 25mm
