Home / Collections / All / Blustream IP200UHD-RX IP Multicast UHD Video Receiver

Blustream IP200UHD-RX IP Multicast UHD Video Receiver

Blustream IP200UHD-RX IP Multicast UHD Video Receiver

Blustream IP200UHD-RX IP Multicast UHD Video Receiver

description
The IP200UHD-RX is an industry leading 4K HDCP 2.2 HDMI video scaling receiver that using visually lossless compression technology delivers HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture.

KEY FEATURES:
  • Advanced UHD video over 1GB Network
  • Virtually unlimited system size
  • Extends HDMI up to a distance of 100m over a single CAT cable
  • Video up-scaling and down-scaling
  • Supports up to 4K 30Hz UHD video output
  • Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
  • Advanced signal management for independent routing of IR, RS-232, USB/KVM, audio and video
  • PoE (Power over Ethernet) to power Blustream products from PoE switch
  • HDCP2.2 compliant with advanced EDID management
  • Analogue L/R audio breakout
  • LAN loop-out for one-to-many extender mode
  • Local 24-56V power supply (should Ethernet switch not support PoE) - sold separately
  • Features 4 operational modes:
  - Matrix distribution (requires 1Gb network switch)
  - Video wall (requires 1Gb network switch)
  - One-to-one HDMI extender (No network switch required)
  - One-to-many HDMI extender (No network switch required)

SPECIFICATIONS:
  • Video Input Connectors: 1x LAN RJ45 connector,
  • Video Output Connectors: 1x HDMI Type A, female
  • Audio Output Connectors: 2x RCA L/R Analogue audio
  • Ethernet port: 1x LAN RJ45 connector (video extension)
  • RS-232 Serial port: 1x 3-Pin Phoenix connector
  • USB/KVM Port: 2x USB - Type A
  • IR Input ports: 1x 3.5mm stereo jack
  • IR Output ports: 1x 3.5mm mono jack
  • Firmware Update (MCU): 1x Micro-USB
  • Mounting kit included
  • Dimensions (W x D x H ): 190mm x 114mm x 25mm