McIntosh C2700
$0.00
McIntosh C2700
description
A worthy successor to our popular DA1 Digital Audio Module, the DA2 features an expanded set of capabilities. The DA2 offers 7 digital inputs including all the same connections found on the DA1 (2 coaxial, 2 optical, 1 USB and 1 MCT) plus a new audio-only HDMI Audio Return Channel (ARC)1 connection. TVs with a compatible HDMI (ARC) output can be connected to the C2700 to enjoy your TV’s sound through your home audio system. Popular multi-channel audio formats from Dolby® and DTS® are supported and will be expertly converted to 2-channel audio for proper playback. The TV remote can control the power and volume of the C2700 when CEC communication is enabled in both the preamplifier and the TV. Besides these new HDMI (ARC) features found in the DA2, its USB input has increased DSD playback support up to DSD512 compared to the DSD256 limit of the DA1.
Electronic Specifications
Connectivity:
General Specifications
Weights & Dimensions
Electronic Specifications
- Number of Channels: 2
- Total Harmonic Distortion: 0.08%
- Frequency Response: +0, -0.5dB from 20Hz to 20kHz, +0, -3dB from 15Hz to 100kHz
- Maximum Volts Out (Balanced / Unbalanced): 16V RMS / 8V RMS
- Sensitivity High Level (Balanced / Unbalanced): 900mV / 450mV
- Sensitivity Phono (Moving Coil): 0.45mV
- Sensitivity Phono (Moving Magnet): 4.5mV
- Signal To Noise Ratio (High Level): 100dB
- Signal To Noise Ratio (Moving Coil): 80dB
- Signal To Noise Ratio (Moving Magnet): 82dB
- Voltage Gain (High Level): 15dB
- Voltage Gain (Moving Coil): 60dB
- Voltage Gain (Moving Magnet): 40dB
- Input Impedance (Balanced / Unbalanced): 44K ohm, 22K ohm
Connectivity:
- Balanced Input: 3
- Unbalanced Input: 4
- Phono Input Moving Coil: 1 (adjustable)
- Phono Input Moving Magnet: 1 (adjustable)
- Upgradeable Digital Audio Module: Yes: DA2
- Digital Coaxial Input: 2
- Digital Optical Input: 2
- Digital MCT (DIN) Input: 1
- Digital USB Input: 1
- HDMI (ARC) Input: 1
- Digital AES/EBU Input: 0
- Balanced Fixed Output: 0
- Balanced Variable Output: 3
- Unbalanced Fixed Output: 1
- Unbalanced Variable Output: 3
- Headphone Output: 1/4" High Drive with Headphone Crossfeed Director (HXD®)
- Input Level Match: Yes, +/- 6dB
- Home Theater PassThru: Yes
- Unbalanced Analog Connector Type: Premium gold-plated solid brass
- Service Port: 1
- Tone Controls: Bass and Treble
- Tone Bypass and Input Assign: Yes
- RS232 Control Input: Yes
- Power Control Output: 1 Main, 4 Trigger
- Rear Panel Data Port: 6
- Rear Panel IR Sensor Input: Yes
General Specifications
- Multi-Chassis or Single: Single, two layer
- Output Meters: Yes
- Vacuum Tube or Solid State: Vacuum Tube, (5) 12AX7a and (1) 12AT7
- Power Consumption (On): 50 Watts
Weights & Dimensions
- Dimensions (W x H x D): 44.45cm x 19.37cm x 45.72cm
- Weight: 13.4kg
