Yamaha XDA-AMP5400RK
$0.00
Yamaha XDA-AMP5400RK
description
Specially designed for custom integration of whole home audio systems, the “AMP” serves as a companion amplifier for the Yamaha XDA-QS5400RK to expand speaker coverage and/or increase power output. It may also be used to expand secondary zone speaker coverage for Yamaha AV receivers that have Zone pre outs. Works together with Yamaha XDA-QS5400RK to expand speaker coverage in custom integrated multi-room audio systems
Eight channels of audiophile-grade Class D amplification, bridgeable and 4-ohm capable, featuring a unique ground loop/hum-free circuit design
Four audio buses and included jumpers allow for wide variety of speaker configurations.
Multi-Room Amplifier:
Spec Sheet Owners Manual
Eight channels of audiophile-grade Class D amplification, bridgeable and 4-ohm capable, featuring a unique ground loop/hum-free circuit design
Four audio buses and included jumpers allow for wide variety of speaker configurations.
Multi-Room Amplifier:
- Audio Specifications: Channel 8 channel (2 channel x 4)
- Minimum Speaker load Capability: 4 ohm
- BTL Connection: Yes
- Speaker Output Terminal: 4 (Euroblock)
- Audio Output Terminal: RCA (2-ch through out): 4
- Trigger In / Out: 4 / 4
- Remote In / Out: 1 / 1
- Rated Output Power: (1 kHz, 0.9% THD, 2ch driven) Normal (4 / 8 ohms): 90 / 50 W, Bridge (8 ohms): 100 W
- Rated Output Power: (1 kHz, 0.9% THD, 1ch driven) Normal (4 / 8 ohms): 100 / 50 W, Bridge (8 ohms):200 W
- Dynamic Power: (20 Hz-20 kHz, 0.08% THD, 2ch driven, 20 ms burst) Normal (4 / 8 ohms): 80 / 40 W, Bridge (8 ohms): 150 W
- Dynamic Power: (1 kHz, 0.9% THD, 2ch driven, 20 ms burst) Normal (4 / 8 ohms): 100 / 50 W, Bridge (8 ohms): 200 W
- Dynamic Power: (1 kHz, 0.9% THD, All ch driven, 20 ms burst) Normal (4 / 8 ohms): 80 / 50 W, Bridge (8 ohms):170 W
- Maximum Effective Output Power: [1-ch driven, 1 kHz, 10% THD] Normal (4 / 8 ohm):130 / 65 W, Bridge (8 ohm): 260 W
- Total Harmonic Distortion: [SP OUT, 20 Hz-20 kHz, 25 W, 8 ohm] 0.04%
- Frequency Response: [1 kHz + 0 / -3 dB] SP OUT AUX IN: 5 Hz-40 kHz
- Signal to Noise Ratio: [SP OUT AUX IN] 108 dB
- Maximum Input Signal: [PRE OUT L / R, 0.9% THD] 1 V
- Gain: [SP OUT 1 V Input] 25.8 dB
- Input Sensitivity: [1 W Power, 8 ohm] 150 mV, [MAX (50W) Power, 8 ohm] 1.0 V
- General
- Power Consumption: 130 W, [All Zone On] No Signal Condition: 32 W, [All Zone Off] Audio Sense On: 14.8 W
- Standby Power Consumption: Audio Sense Disable: 0.3 W, Audio Sense Enable / Mode Standby: 0.5W
- Power Management (Auto Power Standby) Yes (On / Off)
- Dimension: (W × H × D) mm
- [Table Top Mount with Adhesive Feet] 437 x 46 x 443 mm,
- [Table Top Mount with Adhesive Feet and Faceplate] 437 x 46 x 453 mm
- [Rack Mount] 481 x 44 x 443 mm
- [Rack Mount with Faceplate] 481 x 44 x 453 mm
- Weight 6.0 kg
Spec Sheet Owners Manual
